In this article, you are going to learn how to Natively Watch Netflix on the Raspberry Pi 3. The Raspberry Pi is an amazingly affordable device which can achieve so much. A great way to use a Raspberry Pi is as a low cost media center or streaming device. Software like Kodi and Plex can transform the $35 Raspberry Pi into a very powerful media box.
If you really enjoy this article, consider checking out my TechWizTime YouTube Channel. And for an awesome source of Raspberry Pi Accessories, check out my Raspberry Pi Amazon List. With that said, let’s get the Netflix on Raspberry Pi tutorial started!
Table of Contents
Before we get started, you will need to have installed Raspbian Pixel on your Raspbery Pi. You can write the Raspbian image using the tool Etecher. Once you have done that, we need to boot the Raspberry Pi into Raspbian.
Along the top taskbar, you need to click on the Terminal icon (the black icon with the >_ symbol). Now that the terminal is open we need to type in the following command.
wget https://github.com/kusti8/chromium-build/releases/download/netflix-1.0.0/chromium-browser_56.0.2924.84-0ubuntu0.14.04.1.1011.deb
This will start downloading the custom compiled Chromium browser that includes the Widevine DRM. Widevine is required to make Netflix work but is missing from the standard Raspberry Pi Chromium that’s installed by default. The next thing we need to do is install the downloaded package.
sudo dpkg -i chromium-browser_56.0.2924.84-0ubuntu0.14.04.1.1011.deb
This should only take a few moments to install. Lastly, we need to reboot the Raspberry Pi, so go to the Raspberry menu and choose Shutdown. Here you just need to choose the Restart option. Please Note: In some circumstances, you may need to reboot up to three times before Netflix works.
To launch Netflix on the Raspberry Pi, go to the Raspberry menu and under the Internet menu, you need to choose Netflix Launcher. This will automatically start the new pre-compiled Chromium and start at the Netflix page. Make sure you put in your Netflix username and password and you are done!
Congratulations, you’ve just installed Netflix on the Raspberry Pi 3. You won’t have to stream from another PC or run any x86 emulation software.
Were you able to get Netflix running? Did you have any problems during the tutorial? Then leave a comment below.
Unleash the power of the OneXGPU and take your gaming experience to the next level!…
To play the videos stored on your computer, you’ll need a reliable media player. If…
🔔 SUBSCRIBE for more Tech Tips: https://www.youtube.com/tasiacustode?Sub_Confirmation=1 Support me here: https://ko-fi.com/tasiacustode Become a Patron: https://www.patreon.com/TasiaCustode…
15 New Gadgets 2024 | You Will Want To Buy 🔗 LINKS Artemis - https://artemis.wonderfitter.com/…
Razer just released the new Razer Viper V3 Pro mouse, another addition into their Viper…
In this edition of our free software series, I have 4 programs to show you,…
View Comments
Hi, I tried on my Pi 3 but after the second step I've get the following
pi@raspberrypi:~ $ sudo dpkg -i chromium-browser_56.0.2924.84-0ubuntu0.14.04.1.1011.deb
(Reading database ... 133588 files and directories currently installed.)
Preparing to unpack chromium-browser_56.0.2924.84-0ubuntu0.14.04.1.1011.deb ...
Unpacking chromium-browser (56.0.2924.84-0ubuntu0.14.04.1.1011) over (56.0.2924.84-0ubuntu0.14.04.1.1011) ...
dpkg: dependency problems prevent configuration of chromium-browser:
chromium-browser depends on libxcb-image0; however:
Package libxcb-image0 is not installed.
dpkg: error processing package chromium-browser (--install):
dependency problems - leaving unconfigured
Processing triggers for hicolor-icon-theme (0.13-1) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for gnome-menus (3.13.3-6) ...
Processing triggers for desktop-file-utils (0.22-1) ...
Processing triggers for mime-support (3.58) ...
Errors were encountered while processing:
chromium-browser
pi@raspberrypi:~ $
And Netflix Launcher never opnened.
I've looked into the issue and created an installer script that will take care of most issues should they arise. If you are experiencing issues, try this but be aware it does remove CHROMIUM so you may loose settings, bookmarks, history etc.
https://github.com/TechWizTime/chromium-build
Instructions are on the GitHub page.
I couldn't understand why but after these... it sudenly works!
pi@raspberrypi:~ $ sudo apt-get purge chromium
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'chromium' is not installed, so not removed
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
chromium-browser : Depends: libxcb-image0 but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
pi@raspberrypi:~ $ apt-get -f install
E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)
E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?
pi@raspberrypi:~ $ sufo apt-get -f install
bash: sufo: command not found
pi@raspberrypi:~ $ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
libxcb-image0
The following NEW packages will be installed:
libxcb-image0
0 upgraded, 1 newly installed, 0 to remove and 11 not upgraded.
1 not fully installed or removed.
Need to get 23.1 kB of archives.
After this operation, 32.8 kB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libxcb-image0 armhf 0.4.0-1 [23.1 kB]
Fetched 23.1 kB in 2s (8,785 B/s)
Selecting previously unselected package libxcb-image0:armhf.
(Reading database ... 133588 files and directories currently installed.)
Preparing to unpack .../libxcb-image0_0.4.0-1_armhf.deb ...
Unpacking libxcb-image0:armhf (0.4.0-1) ...
Setting up libxcb-image0:armhf (0.4.0-1) ...
Setting up chromium-browser (56.0.2924.84-0ubuntu0.14.04.1.1011) ...
Processing triggers for libc-bin (2.19-18+deb8u9) ...
pi@raspberrypi:~ $
I'm going to give this a shot myself and see if I can simplify it for other users. Thanks for letting me know!!
Nice article. I had the same issue with the dependency. Purge and -f install fixed it.
"sufo" Classic Gaston :-)
With you and Jonathan, they helped me to finish with days of trial and error. Finally I have netflix. Thank you very much, and sorry for my english, I wanted to let you know. Greetings from Argentina.
managed to get this going but the frame rates are so bad it is hardly worth it! Is there a way to improve this or do I need to try again?
Check out my Top 10 Tips for Better Performance in Netflix on the Raspberry Pi here https://www.youtube.com/watch?v=pkmFJ17oCdw
does the netflix can watch on 1080P
It's the same for me. Bad quality and bad framerate. That goes for youtube as well, so I guess it's something to do with the operating system and graphic acceleration. My guess is that it's this bad for everyone. It's frustrating that it's like that when something like OSMC on a raspberry pi plays without hitch. Netflix sucks for not creating their own kodi addon.
Went through the above steps. Have rebooted the device multiple times, but no Netflix Launcher is appearing under the Internet category. I'm rather disappointed, because these are the clearest instructions I've seen to date for newbie non-tech people like me. I just want to be able to watch Netflix in the bedroom along with playing some awesome old-school games :(
For 99% of people, this method works :) In your case, there's a few things you could try. Firstly, from terminal, I would try
sudo apt-get update && sudo apt-get upgradeThen, if you don't mind losing all your bookmarks in Chromium (and settings), try using this script that I created https://github.com/TechWizTime/chromium-build
That might get you up and running with any luck :)
Hi. I get error M7121-1331-P7.
Work very well, with out any issues. Thanks!
Everything installed like a charm, but I also get the Netflix streaming error "M7121-1331-P7" whenever I open a video to watch. It seems like it's loading for some time, but then gives this error :-(
same here....
I managed to run netflix, however I cannot run it in fullscreen mode even increasing the GPU, youtube works perfectly even in 1080p after GPU memory increase.
Hi, 1080p full screen tv. It does not work properly, it does not work fluid. The resolution in full screen decreases. Any idea?
Any luck guys?
Hi thanks for the excellent write up. I am not very tech savvy especially when it comes to Linux but was able to get Netflix running on my Pi 3. I am curious if the chromium build has a limitation of only using a single thread or if it is something I have done or not done? I see choppy but watchable playback and only 50% CPU use.